The warranty for international customers is the same as for any tentional such as masking, painting, or spraying of any material on the lenses, such a jurisdiction apply to any claim by or against DSC, the limitations This system contains security features which were known to be effective at...
ACTA. A compliant telephone cord and Your security system is made up of a DSC control panel, one or more keypads and various sensors modular plug is provided with this product. It is designed to be connected and detectors.
Fire Escape Planning System Information There is often very little time between the detection of a fire and the time it becomes deadly. It is thus very important that a family escape plan be developed and rehearsed. Fill out the following information for future reference and store this manual in a safe place. 1.
To activate the door chime from an LCD Keypad: ___________________________________________ _____________________________________ Press [ ] to enter the function list, then scroll to find... Press [ ] or [4] to enable or disable the Door Chime feature. Press [#] to return to the ___________________________________________ _____________________________________ Ready state.
Access Codes Testing Your System Access codes are used to arm and disarm the system. There are 37 access codes available: 1 master Alarm Test code, 32 regular access codes, 2 duress codes and 2 supervision codes. Ask your installer for more The Alarm Test provides two-second tests of the keypad sounder and bell or siren.
To view troubles from an LED or Fixed Message LCD5501Z keypad: Alternate Arming Methods A trouble will be indicated by the Trouble light/message, which will remain ON until the trouble condition Away Arming is cleared. If you cannot determine the cause of the trouble condition, contact your installer for assistance. Arming the system in the Away mode will have all interior zones and perimeter zones active.
Disarming the System Zone Bypassing Disarming from an LED or Fixed Message LCD5501Z keypad: The zone bypassing function is used when access is needed to part of the protected area while the system is armed. Zones that are temporarily out of service due to damaged wiring or contacts may be Enter the premises through a designated Exit/Entry door.
Continued from page 7 ... Programming codes from an LCD Keypad: If an Alarm Sounds Master Code Fire Alarm Press the [ ] key to enter the function list. Scroll (< >) to... If your system has been installed with fire detectors and the alarm sounds in a pulsing mode, follow your emergency evacuation plan immediately (see “Fire Escape Planning”...
Page 10
PC1555RKZ LED Keypad PC5508Z LED Keypad LCD5501Z Fixed Message Keypad LCD5500Z Keypad System Light (PC1555RKZOnly): If the System light is ON, one or more of these conditions could be present on the system: System Busy System Troubles (see 'Viewing Trouble Conditions' on page 11). Alarm Memory (see 'Disarming the System' on page 6).
Need help?
Do you have a question about the Power432 PC585 and is the answer not in the manual?
Questions and answers