Technical Specifications - Johnson Controls AS-CVTPROx00-1 Installation Instructions Manual

Technical Specifications

Product
Power Requirements
Agency Listings
Ambient Operating
Conditions
Ambient Storage
Conditions
Shipping Weight
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Refer to the Auxiliary Gear Technical Bulletin (LIT-6363080) for necessary information on ordering, operation, and performance specifications
of this product.
Controls Group
507 E. Michigan Street
P.O. Box 423
Milwaukee, WI 53201
6 AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter Installation Instructions
AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter
AS-CVTPRO100-1 with 120VAC/3VDC External Power Adapter (North American version)
AS-CVTPRO200-1 without power adapter (European version)
Zone Bus: Controller Supplied Power: Stand-alone or via Thermostat - 24 VAC or
VMA applications - 15 VDC
N2 Bus: External Power Adapter: 120 VAC to +3 VDC 200 mA Class 2 Transformer
(Included with CVTPRO Converter in North America only) or
Battery Power: Two type AAA Alkaline, not included, see Table 5.
FCC Part 15 Subpart B, Class A
CE Mark: EN50081-2 (Electromagnetic Compatibility, EN55011, Class A)
EN50082-2 (Electromagnetic Compatibility, EN61000-3-2 and EN61000-3-3)
0 to 50 C (32 to 122 F) 20-80% RH (Relative Humidity)
30 C (86 F) Maximum Dew Point
-40 to +60 C (-40 to 140 F) 5-95% RH
30 C (86 F) Maximum Dew Point
0.227 kg (0.5 lb.)
Published in U.S.A.
www.johnsoncontrols.com