H.323 Settings - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

H.323 settings

The H.323 settings let you specify:
•
An H.323 alias.
•
Your H.323 id.
•
Gatekeeper discovery (Manual or Automatic).
•
The Gatekeeper address must be specified by you if
discovery has been set to manual.
•
Authentication mode On or Off. If set to On, the EX90 will
send Login name and password to the Gatekeeper for
authentication.
In addition there are:
•
Two fields to enter Login name and password. The
alphanumeric keyboard will appear whenever needed.
Be sure to:
•
Tap Save to put changes into effect.
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 The settings The settings
nora.dollhouse@supplier.com
31
User guide
Web interface Contact us
www.cisco.com