Calling More Than One (Ii) - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

Calling more than one (II)

To put one of the participants on hold, tap that participant.
A menu will appear next to that person allowing you to put
him or her on hold. To put both on hold, tap Hold (next to
the red Terminate call button), as outlined.
(Optional feature)
Call transfer
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 Using the EX90
Tap on the participant on hold to display options.
With one on hold,
tap the one in call to
display the menu.
The menu will allow
you to transfer this
call to someone else.
A indicates that
you should use the
Dialpad, the Phone
book, or the Recent
calls list to locate
whom to transfer the
call to.
20
The settings
Tap Swap to swap the two participants (switch
between the two). If you expand the list you will be
able to also choose between joining the two (bring
the one on hold back in) or disconnecting the one
on hold.
Sharing presentations
In a call, you may share
your PC screen with the
other side. Tap View
desktop (as above) and
then tap Start to activate.
To deactivate, tap Stop.
For other aspects of this
feature, including how to
use the EX90 as your PC
screen—see the section
"Use as PC screen" on
page 10
User guide
Web interface Contact us
www.cisco.com