Calling More Than One (I) - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction
Calling another (optional feature)

Calling more than one (I)

You can be in a call with two
others simultaneously, or one at
a time. This is an optional feature
that may, or may not, be present
in your system.
Place the call.
(Optional feature)
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Tap Add to call another.
You may want to
(but do not have to) put
the current
call on hold first.
You will now have both parties shown side-by-side
on your main screen.
Using the EX90 Using the EX90 The settings
19
Web interface
You will now see the list of recent calls. Tap an entry
here, or tap My contacts or Phone book and do
your selection there.
Alternatively, you may tap the Dial pad and use that
to place the call as shown in "Calling someone by
dialing" on page 15.
To terminate one of the two calls, tap the
participant to be disconnected. This will produce
a small menu, with which you may terminate that
part of the call. To terminate both calls, tap the red
Terminate call directly.
User guide
Contact us
www.cisco.com