Thermo Scientific FOCUS GC Instruction Manual page 14

About This Manual
Chapter 10, Autosamplers, describes how to program and control the AS 2000
autosampler and the AI 3000/AS 3000 by using the FOCUS GC keypad. This
chapter contains also the instructions to programming a sample sequence with the
FOCUS GC keypad when an AS 2000 or an AI 3000/AS3000 is used and how to
set up ranges of samples to run automatically.
Chapter 11,
GC through the instrument keypad. We also included instructions to program a
Run Time Events and the instrument start-up.
Chapter 12,
check the Flame Ionization Detector with the Split/Splitless Injector (S/SL).
Chapter 13,
check the Thermal Conductivity Detector (TCD) with the Split/Splitless Injector
(S/SL).
Chapter 14,
to check the Thermal Conductivity Detector (TCD) with the Purged Packed
Injector (PPKD).
Chapter 15,
operating sequences to perform the necessary maintenance of the instrument and
also information concerning troubleshooting in case of malfunctioning.
Chapter 16,
the FOCUS GC with the LAN (Local Area Network) option.
Appendix A,
Fisher Scientific offices worldwide. Use the
us feedback on this manual and help us improve the quality of our documentation.
The
abbreviations, acronyms, metric prefixes, and symbols.
The
including cross references and the corresponding page numbers.
xiv
Getting Started, contains instructions to operate with your FOCUS
Checkout Using FID with
Checkout Using TCD with
Checkout Using TCD with
Maintenance and
LAN Option Set-up, contains notes on how to set-up and start using
Customer Communication, contains contact information for Thermo
Glossary contains definitions of terms used in this manual. This also includes
Index contains an alphabetical list of key terms and topics in this guide,
S/SL, contains the operating procedure to
S/SL, contains the operating procedure to
PPKD, contains the operating procedure
Troubleshooting, contains information and
Reader Survey
Overview
in this section to give
Instruction Manual