Motorola DCT 2000 Installation Manual page 68

The EPOCH TYPE field is for Motorola use only [refer to TSODA GATEKEEPER INTERFACE
PROTOCOL document #DCII-093-052, Service Status Reply for description of
current_epoch_status and next_epoch_status].
The AUTH field is for Motorola use only [refer to TSODA GATEKEEPER INTERFACE PROTOCOL
document #DCII-093-052, Service Status Reply for description of
current_epoch_auth_reason and next_epoch_auth_reason].
The SERVICE field is for Motorola use only [refer to TSODA GATEKEEPER INTERFACE
PROTOCOL document #DCII-093-052, Service Status Reply for description of
service_number].
The STATUS field is for Motorola use only [refer to TSODA GATEKEEPER INTERFACE
PROTOCOL document #DCII-093-052, Service Status Reply for description of
service_status].
The ID field is for Motorola use only [refer to TSODA GATEKEEPER INTERFACE PROTOCOL
document #DCII-093-052, Service Status Reply for description of service_ID].
The CH indicates the channel currently tuned when the OSD screen displayed.
The TUNED FREQ (Carrier Definition Frequency + 1.75 MHz) is the actual frequency the
tuner is programmed.
Figure B-14 illustrates the current channel status display on the OSD:
F i g u r e B - 1 4
C u r r e n t C h a n n e l S t a t u s - O S D
07 CURRENT CHANNEL STATUS
TYPE
STATUS
CONNECTED
PREVIEW
PURCHASABLE
PURCHASED
EPOCH NUM
EPOCH TYPE
AUTH
SERVICE 0
CH 204
DIGITAL
STATUS 1 ID
TUNED FREQ
D i a g n o s t i c s
aaa bb
ccccc
dddd
NO
CURR NEXT
NO --
NO --
0X0 1
0x0 0x0
0X0 0X0
0X0004 0X00
543.000
D C T 2 0 0 0 I n s t a l l a t i o n M a n u a l
B - 2 1