Operational Check - Motorola DCT 2000 Installation Manual

3 - 2 0 I n s t a l l a t i o n
O p e r a t i o n a l C h e c k
The operational check tests the communication link between the remote control and the
DCT2000. The procedures verify the DCT2000 response to remote control commands.
Table 3-2 lists the operational check procedures:
T a b l e 3 - 2
O p e r a t i o n a l c h e c k
Feature
Power on
Channel Selection
Volume Control
If the DCT2000 does not operate properly, refer to Section 5, ''Troubleshooting.''
D C T 2 0 0 0 I n s t a l l a t i o n M a n u a l
Testing Procedure
Press to turn on the DCT2000.
POWER
Turn on the TV and tune it to the output channel of the DCT2000 (channel 3 or
4).
Scan through the channels using the
the + - keys on the remote control.
CHANNEL
Tune to several channels by entering the channel number with the numeric keys
on the remote control.
Use the TV volume control to adjust the sound volume to a moderate level.
Press + - on the remote control to increase the volume to its upper limit,
VOLUME
lowest level, and to a comfortable level.
Press to turn the sound completely off. Press
MUTE
sound.
56 keys on the DCT2000 and
CHANNEL
again to restore the
MUTE