Table of Contents
Advertisement
15. Enter the Administrator password, and then click the arrow to log in.
The Windows Server 2012 desktop appears.
This completes the installation.
16. Proceed to
the post installation tasks.
▼ Install Windows Server 2008 (SP2 or R2 SP1) or
Windows Server 2012 (R2) Using PXE Network
Boot
This section explains the initial information you will need and provides the
instructions you need to follow to install the Windows Server 2008 (SP2 or R2 SP1) or
Windows 2012 (R2) operating system over an established PXE-based network using a
customer-provided Windows Imaging Format (WIM) image.
Note that the procedure presented in this section documents the initial steps to install
Windows Server over the network using a Windows Deployment Services (WDS).
Specifically, it explains the steps for selecting the server PXE network interface card
that will communicate with your WDS installation server. For further information
about using WDS to install the Windows Server operating system, see Microsoft's
Windows Deployment Services documentation.
52
Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
"Post Installation Tasks for Windows Server" on page 57
and perform
Advertisement
Table of Contents
