▼ To Install Microsoft's IPMI System Management Driver
(Windows Server 2003 R2 SP2)
Do the following before attempting to use the IPMItool through the Windows
operating system:
1. Install the Microsoft IPMI System Management driver:
a. In Control Panel, open Add/Remove Programs.
b. Click Add/Remove Windows Components.
c. Highlight Management and Monitoring Tools component, and then click
d. Do one of the following:
e. Read the warning and then click OK.
f. Click OK.
g. Click Next.
2. Instantiate the IPMI System Management driver.
3. On the Taskbar, click Start, and then click Run.
The Run dialog box is displayed.
4. In the Open list, type:
rundll32 ipmisetp.dll,AddTheDevice
and then click OK.
The IPMI System Management driver is instantiated.
5. To ensure that the IPMI System Management driver is installed, repeat steps 1a
through 1c, above.
56
Sun Blade X6250 Server Module Windows Operating System Installation Guide • September 2008
The Add/Remove Programs dialog is displayed.
The Windows Components Wizard dialog is displayed.
Details.
The Management and Monitoring Tools page is displayed.
If the Select the Hardware Management subcomponent check box is
■
already selected, skip to
If the Select the Hardware Management subcomponent check box is not
■
selected, select it. The "3rd Party Drivers" warning dialog appears.
The Management and Monitoring Tools page is displayed.
The Windows Components Wizard dialog is displayed.
The Hardware Management component is installed.
Step
2.