Vehicle Selection - Actron Super AutoScanner CP9145 User Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Using The Tool
Measurement Units
To change the measurement units, use
the 83'2:1 arrow keys to select
English/Metric and press (17(5.
In the Measurement Units menu, select
En gli sh or Metr ic and th en p ress
(17(5. English is the default.
Press (17(5 again to return to the Setup Tool menu.
Tool Information
This function allows you to view specific tool information that may be needed
when contacting customer service. Select Tool Information with the 83'2:1
arrow keys and press (17(5.
The information shown to the right displays
on the screen. Use the 83'2:1 arrow
keys to view all the lines.
Press the %$&. or (17(5 key to return to
the Setup Tool menu.
Write this information in the space provided on the inside of the front cover.

Vehicle Selection

When the tool powers up, the "Key Button Help" screen is followed by a Main
Menu screen.
Pick Vehicle Diagnosis to begin Vehicle
Selection.
If there is a previous vehicle present, the tool displays that vehicle. You can
choose the last vehicle selected or setup for a new vehicle. The tool retains all data
retrieved from the last vehicle selected until any of the following occurs:
A new vehicle is selected
Battery is dead or disconnected
Tool is flash programmed to update software
The last vehicle selected is kept but you choose Erase Data
You can either keep the previously
selected vehicle or change it. If changing
the vehicle, press the 5,*+7 arrow key
and press (17(5. Otherwise, press
(17(5 to keep the current one.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 – 5
'7FGB (AA>
[ S@9>;E:/!7FD;5
S(AA> @8AD?3F;A@
(AA> @8AD?3F;A@
[ '7D;3> "A
'+ 
+ *7D
AAF *7D
$DA6 
A3D6 
GD@ 3F7
GD@ A5
!3;@ !7@G
[ *7:;5>7 ;39@AE;E
(AA> '7FGB
(AA> '7>8W(7EF
"7A@
 X ' '# 
 $
2
 
/ /
^
]
 "