Help & Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• Memory Test
If the tool has trouble playing back recorded data, displaying trouble code
definitions, or doing any other function that uses internal memory, then it is a good
idea to run the Memory Test.
From the Tool Self-Test menu, select Memory Test and press (17(5.
A MEMORY TEST message displays and
the screen fills with dots as the internal
memory is tested.
The Memory Test may take several
minutes to complete.
If no problems were detected, then a
MEMORY TEST PASSED! message
displays on the screen. If a problem was
detected, then a MEMORY TEST FAILED!
message and the software identification
(SW ID) display on the screen.
Press the (17(5 key to return to the Tool Self-Test menu.
• Program Mode
The Program Mode is accessed from the Main Menu. This mode is used for
updating the tool software. Instructions are provided with the new software.
TECHNICAL SUPPORT
• Toll-Free Number: 1-800-228-7667
7
• e-mail: tech_support@actron.com
• visit website: www.actron.com
7 – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
!7?ADK (7EF X X X X X X
X X X X X X X X X X
!7?ADK (7EF 3;>76
'+
$D7EE "(& (A A@F