Battery Replacement; Tool Self-Tests - Actron Super AutoScanner CP9145 User Manual

Help & Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

BATTERY REPLACEMENT

The tool requires a 9V (type 6LR61) alkaline battery to operate independent of
vehicle and AC power. When the batteries need to be replaced, the low-battery

icon (
Rechargeable batteries do not last as long alkaline types and are not
recommended.
Non-rechargeable Lithium (Li) batteries can be used. Though Lithium types
last longer than the alkaline types, they are more expensive.
Follow these steps to replace the batteries:
1) Place the tool with the display
facing down on a non-abrasive
surface.
2) Remove the battery cover
screw.
3) Slide the battery cover off.
4) Remove discharged batteries
and properly discard.
5) Install new battery.
6) Slide battery cover on.
7) Install screw — do not
overtighten.

TOOL SELF-TESTS

If you experience problems when performing the Tool Self-Tests, contact
7
technical support at 1-800-228-7667 (8:00 – 6:00 EST Monday – Friday) or send
an email to tech_support@actron.com
Tool Self-Tests check the display, keypad, internal memory, and RS-232
interface.
After powering up the tool, the Main Menu
displays four choices. Select Tool
Self-Test with the 83'2:1 arrow keys
and press (17(5.
From the Tool Self-Test menu, choose from Display Test, Keyboard Test, or
Memory Test.
7 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
) displays.
Screw
9V Battery
Cover
!3;@ !7@G
*7:;5>7 ;39@AE;E
(AA> '7FGB
[
(AA> '7>8W(7EF
^
]