Erase Codes; Eec-Iv Erase Codes; Mecs Erase Codes - Actron Super AutoScanner CP9145 User Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Ford Historic Diagnostics

ERASE CODES

The vehicle service manual may recommend erasing Continuous Memory Codes
from vehicle's memory, and then drive vehicle to duplicate the malfunction before
beginning a diagnostic test. If KOEO codes were read using Fast Codes, the
memory codes have already been erased.
Only Continuous Memory Codes can be erased from the vehicle without repairing
the fault. To remove KOEO and KOER Codes, the fault must be repaired since
they only exist when a fault exists.

EEC-IV Erase Codes

Select Erase Codes from the Ford
Function List and press (17(5.
Press (17(5 after each message.
#@>K !7?ADK A67E
D7 D3E34>7M
$D7EE "(& FA A@F
Follow all instructions on the display.
1) Turn Ign Key Off.
2) Transmission In Park Or Neutral.
3) Wait 10 Seconds.
4) Turn Ign Key On.
Press (17(5 to begin erasing the codes.
The procedure takes less 1 minute to run.
Press %$&. to return to the Ford
Function List.

MECS Erase Codes

Select Erase Codes from the Ford
Function List and press (17(5.
Press (17(5 after each message.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 7
AD6 G@5F;A@
S&7H;7I A67E
[ SD3E7 A67E
S+;99>7 F7EF
(A D3E7 ## @6
#& A67EV -AG !GEF
;J 3GE7 A8 A67X
$D7EE "(& FA A@F
D3E;@9 A67E
$DA576GD7 &G@E
(:3@ !;@GF7X
(;?7 &7?3;@;@9 
AD6 G@5F;A@
S&7H;7I A67E
[ SD3E7 A67E
S+;99>7 F7EF
;EF ^
\
]
5
7EE
;EF ^
\
]