Module Power Adapter - LG-Nortel ipecs Installation Manual

IPECS Release 5
Hardware Description & Installation
Issue 5.0
4.5.1.9

Module Power Adapter

Modules are shipped without AC/DC Adapters. Therefore if an adapter is required, it must be
ordered separately. The AC/DC Adapter converts local AC to 48 VDC for Module power. One
side of the adapter has a three (3) prong parallel blade male termination and mates with the
power cord supplied. The AC power cord supplied is plugged into the adapter and into the local
AC power source. See section 4.3.3 for installing the module in a DHLD, section 4.3.4 for
WHLD or section 4.3.5 for 1U-RMB.
The other end of the adapter is terminated in a DC power cord with a plug at the end. This DC
power plug is inserted into the power input jack on the upper front panel area of each Module.
The Power LED on the Module front panel will illuminate when power is applied.
70