4.5.15 Mcim Installation; Table 4.5.15-1 Mcim Status Led Functions - LG-Nortel ipecs Installation Manual

IPECS Release 5
Hardware Description & Installation

4.5.15 MCIM Installation

The MCIM may be installed anywhere except for slot 10 of the cabinet, or may be installed
anywhere in the Desk Mount Holder. The MCIM performs the various conference functions for
multi-party voice conferences. With the MCIM iPECS terminals can establish voice conferences
with up to 32 parties using the g.711 or g.729 codecs or 24 parties with the g.723 codec.
LEDs
In addition to the Power and LAN LEDs, the MCIM has four (4) LEDs for status information as
shown in Table 4.5.15-1
Wiring Connectors
Before wiring any of the Modules, first connect the "
known ground, refer to section 4.5.1.4.
On the front of the MCIM is the RJ 45 type "LAN" connector. This connector should be wired to the
appropriate LAN points as discussed in section 4.5.1.6 and 4.5.1.7.
Wire "LAN" to a 10/100 Base-T switch, a POE8 can be used to connect to the LAN.
Tag or number wiring for maintenance.
AC/DC Adapter
If a PSU is not employed, assure the AC/DC Adapter is plugged into a live AC outlet and the
Module Power jack.

Table 4.5.15-1 MCIM Status LED Functions

LED
Voice Conf Voice Conference Active
Video Conf Video Conference Active
S1 Reversed
S2 Reversed
LED Function
" screw on the back of the Module to a
92
Issue 5.0