Table of Contents
Advertisement
IPECS
Release 5
Hardware Description & Installation
As shown in Figure 2.1.11-2, the front panel of the RSGM has:
•
Power status LED,
•
RCA jack for external music (audio) source -BGM-,
•
Eight (8) LEDs,
•
RJ-45 Female LAN connector with Speed and Link/Activity LEDs for WAN connection,
•
RJ-45
Female
Link/Activity LEDs for PC connection,
•
RJ-45
Female
Link/Activity LEDs for IP phone connection,
•
LED indicator to display IP phone power feeding status.
On the rear panel, the RSGM has:
•
One (1) RJ-11 female connector for analog CO Line,
•
One (1) RJ-11 female connector for analog SLT,
•
One (1) RJ-11 female connector for alarm/door bell input
and dry relay contact #2,
•
One (1) RJ-11 female connector for external BGM and
dry relay contact #1,
•
Four (4)-position DIP-switch for mode selections,
•
One (1) position DIP-switch for IP phone power feeding
selection,
•
DB-9 RS-232 connector,
•
Reset Switch,
•
Power jack for the AC/DC adapter supplied; see section
2.1.15 AD/DC adapter –G-,
•
Ground Lug.
LAN
connector
with
LAN
connector
with
Speed
and
Speed
and
Figure 2.1.11-2 RSGM Front & Rear Panels
21
Issue 5.0
Hide quick links:
Advertisement
Table of Contents
