Module Desk Mount Holder Kit; Figure 4.3.3-1 Module Desk Mount Holder Kit - LG-Nortel ipecs Installation Manual

IPECS Release 5
Hardware Description & Installation
4.3.3

Module Desk Mount Holder Kit

To assemble the Desk Mount Holder, refer to the instructions below and Figure 4.3.3-1. Note a
Desk Holder Extender is required for each Module.
Place the key-hole slots on the side of the Extender over the keys on the side of the
bookend.
Slide the Extender and bookend in opposite directions to the locked position.
Repeat for additional Extenders and the other bookend.
Once assembled, Modules are simply placed in the Desk Holder "slots". The front of all Modules
should be placed on the same side of the Desk Holder.

Figure 4.3.3-1 Module Desk Mount Holder Kit

54
Issue 5.0