Table of Contents
Advertisement
IPECS
Release 5
Hardware Description & Installation
4.5.14 VMIM Installation
The VMIM may be installed anywhere except for slot 10 of the cabinet, or may be installed
anywhere in the Desk Mount Holder. The VMIM module provides voice storage and processing for
Automated Attendant and Voice Mail capabilities as well as other Voice Processing features.
The VMIM module can support up to 8 channels with up to 9 hours of storage.
LEDs
In addition to the Power and LAN LEDs, the VMIM has four (4) LEDs for status and diagnostics
information as shown in Table 4.5.14-1
LED
RECORD
PLAY
MEM FULL
S1
Wiring Connectors
Before wiring any of the Modules, first connect the "
known ground, refer to section 4.5.1.4.
On the front of the VMIM is the RJ 45 type "LAN" connector. This connector should be wired to the
appropriate LAN points as discussed in section 4.5.1.6 and 4.5.1.7.
Wire "LAN" to a 10/100 Base-T switch, a POE8 can be used to connect to the LAN
Tag or number wiring for maintenance.
AC/DC Adapter
If a PSU is not employed, assure the AC/DC Adapter is plugged into a live AC outlet and the
Module Power jack.
Table 4.5.14-1 VMIM Status LED Functions
LED Function
Voice mail Record active
Voice mail Play back active
Memory full
Reversed
" screw on the back of the Module to a
91
Issue 5.0
Hide quick links:
Advertisement
Table of Contents
