Table of Contents
Advertisement
OT-11P Auto Tuner Overview
Your OT-11P comes fully assembled, aligned and ready to install. You will install the tuner
inside your Orion transceiver, resulting in a fully integrated internal tuner. After installation, your
OT-11P tuner will be controlled by the Orion's front panel TUNE button.
Installation is straightforward; you will mount the tuner inside your Orion transceiver, remove
one coax jumper, install three plugs and solder one connection. These are simple steps, well
within the abilities of anyone with basic electronic assembly skills. Simply follow the step-by-
step directions, referring to the accompanying illustrations. Work patiently, read through each
step completely before proceeding and check your work often.
Your workplace should be uncluttered, well lighted and well ventilated, and protected from static
discharge. A grounded static mat is ideal, but you should at least be able to touch a ground point
(light switch, water pipe, etc) from time to time to avoid static buildup.
Installing the OT-11P according to these instructions does not void your Ten-Tec warranty.
4
Advertisement
Table of Contents
