Installing Your Cable Modem; Installing The Software - Zoom PCI Internal User Manual

Installing Your Cable Modem

Note: If your cable company provides you with an installation Note:
Note: Note:
procedure, follow it instead of the instructions in this
chapter.
This chapter describes how to install your Zoom PCI cable
modem in your computer and connect to your cable service.
Installation consists of a few simple steps:
1. Install the software.
2. Install the hardware.
3. Ensure that the automatic synchronization procedure is
successful.

Installing the Software

Install your cable modem software first, before connecting the
modem hardware. Follow these steps.
1
Your computer should be on. Insert the Zoom CD into your
computer's CD-ROM drive. The CD will start automatically.
(If it doesn't, from the desktop, go to Start | Run and then
type d:\setup.exe, where d: is the letter of your CD-ROM
drive.)
1 Installing Your Cable Modem
1
5