Troubleshooting - UTStarcom F1000 Series Quick Start Manual

5

Troubleshooting

Volume is too low or too loud on a call:
During a call, adjust the volume using
I am using a headset/earpiece, but I can't seem
to hear the conversation or it is distorted:
Make sure your headset/earpiece has a round
2.5mm 3 conductor plug (4 silver sections with 3
black rings) as used by the F1000.
I'd like to use a different ring tone:
Several ring tone choices are available under
Profiles: Press
of the current profile. Press
Tone and press
desired ring tone option and press
I'd like to use a different standby screen
picture:
Several choices are available under Scheme:
Press (Menu); press
and press
and press
Page 11
.
to quickly access the menu
to scroll to Ring
(Ok). Press to reach the
(Ok).
to scroll to Settings
(Ok); press to scroll to Scheme
(Ok).
5
Troubleshooting
My F1000 phone's time is off by one hour:
Check your Time Zone and Daylight Saving Time settings.
Refer to "Set Time Zone and DST" in the "How do I..."
section.
How do I know what my IP address and Mac Address
is?
Access the Network Information option: Press
press to scroll to WiFi-Settings and press
to scroll to Network Parameter and press
press
(Ok). Press to scroll to Network Information and press
(Ok).
Net Search didn't find my AP:
Make sure SSID broadcasting is enabled on your AP.
For more troubleshooting help, visit www.vonage.com/help.
HELPFUL HINT: Your WiFi phone's Local Log function provides the
phone's status information. The troubleshooting help website may ask
you to refer to this information while analyzing the problem. Press
(Menu); press to reach MISC and press
scroll to Local Log and press
will be displayed.
Page 12
(Menu);
(Ok);
(Ok); press to
(Ok). The phone's status information