Installing The Baffle - Paradyne 9000 Series Installation Instructions Manual

Once the carrier is connected to ac power, the fans in the fan tray begin circulating air
and the green LED lights. If not, check potential reasons in Troubleshooting in the
User's Guide or Supplement.

Installing the Baffle

A baffle with Speed Nuts is provided for heat deflection. Extender brackets are also
provided to convert the baffle for use in a 23-inch rack.
1. If installing the baffle in a 23-inch rack, attach the two extender brackets to each
side of the baffle using four of the Speed Nuts (#12-24) and four of the screws
(#12-24 x 1/2-inch) provided.
2. If the rack does not have threaded screw holes, slip a Speed Nut onto the first
available hole on each side of the rack beneath the installed carrier. Align the hole
of the Speed Nuts with the hole in the rails.
3. Using four of the screws provided, attach the baffle to the rack immediately below
the carrier, as shown.
23" Cabinet
Baffle
7
Speed
Extender
Nuts
Speed
Nuts
19" Cabinet
97-15789
Bracket