Alliance Laundry Systems HSE117*A Service Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Dryer
  5. HSE117*A
  6. Service manual

Alliance Laundry Systems HSE117*A Service Manual

Stacked dryers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Stacked Dryers
Metered and Nonmetered
See Page 6 for Model Numbers
PERM PRESS
DELICATE
NORMAL
FLUFF
(NO HEAT)
IN USE
FABRIC SELECTOR
PUSH TO START
PUSH TO START
PERM PRESS
DELICATE
IN USE
NORMAL
FLUFF
(NO HEAT)
Commercial Dryer
FABRIC SELECTOR
D330P
Part No. 505038
May 1998

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HSE117*A and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems HSE117*A

Summary of Contents for Alliance Laundry Systems HSE117*A

  • Page 1 Stacked Dryers Metered and Nonmetered See Page 6 for Model Numbers PERM PRESS DELICATE NORMAL FLUFF (NO HEAT) IN USE FABRIC SELECTOR PUSH TO START PUSH TO START PERM PRESS DELICATE IN USE NORMAL FLUFF (NO HEAT) Commercial Dryer FABRIC SELECTOR D330P Part No.

  • Page 2: Table Of Contents

    25. Card Reader ..............36 SECTION 9 – Wiring Diagrams ........79 © Copyright 1998, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the written permission of the publisher.

  • Page 3: Section 1 - Safety Information

    SECTION 1 Safety Information Throughout this manual and on machine decals, you will IMPORTANT find precautionary statements (“CAUTION”, The word “IMPORTANT” is used to inform the reader “WARNING”, and “DANGER”) followed by specific of specific procedures where minor machine damage instructions.

  • Page 4: Locating An Authorized Servicer

    Always contact your dealer, distributor, service agent or the manufacturer about any problems or conditions you do not understand. Locating an Authorized Servicer: Alliance Laundry Systems is not responsible for personal injury or property damage resulting from improper service. Review all service information before beginning repairs.

  • Page 5: Section 2 - Introduction

    Customer Service If literature or replacement parts are required, contact the source from whom the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950 for the name and address of the nearest authorized parts distributor. For technical assistance, call (920) 748-3121.

  • Page 6: Model Identification

    Metered Drop Drop Slide Display Reader Reader Electric Number Model Model Counter Ready Installed Ready Control Ready Installed Heat Heat HSE117*A HSG119*A SSE007*A SSE107*A SSE117*A SSE307*A SSE407*A SSE417*A SSE507*A SSE517*A SSE607*C SSE617*C SSE707*A SSE717*A SSG009*A SSG109*A SSG119*A SSG309*A SSG409*A SSG419*A...

  • Page 7: How Your Dryer Works

    How Your Dryer Works CYLINDER LINT FILTER HEATER DUCT EXHAUST AIR DUCT DELIC ATE PERM PRES FLUF F (NO HEAT NORM AL ECT OR FAB RIC SEL STA RT PUS H TO IN USE STA RT IN USE PUS H TO DELIC ATE PERM PRES FLUF F...

  • Page 8: Section 3 - Troubleshooting

    SECTION 3 Troubleshooting WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 9: Unit Stops In Cycle; Quits After The First Few Loads; Has A Burning Smell; Cycles On Motor Thermal Protector

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 10: Motor Does Not Stop

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 11: Igniter Does Not Glow (Gas Supply Sufficient) - Gas Models

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 12: Heater Assembly Or Burner Shuts Off Prematurely

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 13: Heater Assembly Or Burner Does Not Shut Off

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 14: Clothes Are Too Hot When Removed From Dryer

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 15: Section 4 - Grounding

    SECTION 4 Grounding WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 16: Metered And Nonmetered Models - Ground Wires From Control Cabinet To Timer (Depending On Model) Or Control Panel

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 17: Section 5 - Service Procedures

    SECTION 5 Service Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 18: Control Panel And Controls (Electromechanical Metered And Nonmetered)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 19 CONTROL STRAIN CABINET RELIEF GROUND WIRE (Green) TIMER SCREW SCREW TIMER KNOB ASSEMBLY GROUND CLIP OVERLAY LOCK ASSEMBLY SETSCREW TEMPERATURE SELECTOR SWITCH LOCKWASHER PUSH-TO-START SWITCH ASSEMBLY SETSCREW LOCKWASHER INDICATOR LIGHT CONTROL CONTROL CONTROL KNOB PANEL KNURLED PANEL ASSEMBLY D140PE3A FRAME OVERLAY Figure 7 CONTROL PANEL AND CONTROLS...
  • Page 20 LOCKWASHER INDICATOR LIGHT CONTROL PANEL SETSCREW D361PE3A KNURLED CONTROL KNOB ASSEMBLY Figure 8 CONTROL PANEL AND CONTROLS (Models HSE117*A, HSG119*A, SSE107*A, SSE117*A, SSE307*A, SSG109*A, SSG119*A and SSG309*A) * ADD LETTER TO DESIGNATE COLOR. L - Almond W - White 505038...

  • Page 21: Control Cabinet Front

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 22 LOCATOR SCREW LOCATOR CABINET CAGED NUT (Lower Dryer) FRONT PANEL (Lower Dryer) D333PE3A Figure 10 CONTROL CABINET (Models HSE117*A, HSG119*A, SSE107*A, SSE117*A, SSG109*A, SSG119*A, SSE307*A and SSG309*A) * ADD LETTER TO DESIGNATE COLOR. L - Almond W - White 505038...
  • Page 23 SCREW WASHER SCREW CONTROL CABINET WRAPPER SCREW CAGED BRACKET SWITCH CONTROL FRONT CABINET SCREW SCREW SCREW SCREW SCREW LOCATOR SCREW LOCATOR CAGED NUT CABINET (Lower Dryer) D354PE3A FRONT PANEL (Lower Dryer) Figure 11 CONTROL CABINET (Models SSE407*A, SSE417*A, SSE507*A, SSE517*A, SSG409*A, SSG419*A, SSG509*A and SSG519*A) * ADD LETTER TO DESIGNATE COLOR.
  • Page 24 SCREW WASHER SCREW CONTROL CABINET WRAPPER CONTROL FRONT CABINET SCREW SCREW SCREW SCREW SCREW LOCATOR SCREW LOCATOR CAGED NUT CABINET (Lower Dryer) D355PE3A FRONT PANEL (Lower Dryer) Figure 12 CONTROL CABINET (Models SSE607*C, SSE617*C, SSG609*C and SSG619*C) * ADD LETTER TO DESIGNATE COLOR. L - Almond W - White 505038...
  • Page 25 SCREW WASHER SCREW CONTROL CABINET WRAPPER SCREW CARD READER CONTROL FRONT CABINET INSTRUCTIONS C a r d M a t e SCREW SCREW SCREW SCREW SCREW LOCATOR SCREW LOCATOR CAGED NUT CABINET (Lower Dryer) D356PE3A FRONT PANEL (Lower Dryer) Figure 13 CONTROL CABINET (Models SSE707*A, SSE717*A, SSG709*A and SSG719*A) * ADD LETTER TO DESIGNATE COLOR.

  • Page 26: Control Panel Overlay (Electromechanical Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 27: Accumulator (Electromechanical Metered Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 28: Electronic Control

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 29 SINGLE COIN DROP LOCKNUT STRAIN RELIEF CONTROL CABINET FRONT LOCK ASSEMBLY CONTROL CABINET WRAPPER ELECTRONIC CONTROL SCREW CONTROL PANEL D351PE3A GRAPHIC OVERLAY Figure 15 CONTROL PANEL AND CONTROLS (Models SSE407*A, SSE417*A, SSE507*A, SSE517*A, SSG409*A, SSG419*A, SSG509*A and SSG519*A) * ADD LETTER TO DESIGNATE COLOR. L - Almond W - White 505038...
  • Page 30 STRAIN RELIEF CONTROL CABINET FRONT SCREW CONTROL CABINET WRAPPER LOCK ASSEMBLY ELECTRONIC CONTROL SCREW CONTROL PANEL D352PE3A GRAPHIC OVERLAY Figure 16 CONTROL PANEL AND CONTROLS (Models SSE607*C, SSE617*C, SSG609*C and SSG619*C) * ADD LETTER TO DESIGNATE COLOR. L - Almond W - White 505038...
  • Page 31 STRAIN RELIEF CONTROL CABINET FRONT SCREW CONTROL CABINET WRAPPER LOCK ASSEMBLY ELECTRONIC CONTROL SCREW CONTROL PANEL D353PE3A GRAPHIC OVERLAY Figure 17 CONTROL PANEL AND CONTROLS (Models SSE707*A, SSE717*A, SSG709*A and SSG719*A) * ADD LETTER TO DESIGNATE COLOR. L - Almond W - White 505038...

  • Page 32: Coin Drop

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 33 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 34: Card Reader

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 35: Cabinet Top (Upper Dryer)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 36: Lint Filter

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 37: Reversing Door Procedure

    Reversing Door Procedure . . . The door on this dryer is completely reversible. To reverse door proceed as follows: D312S D311S D310S Remove all Pull bottom of door liner out, then pull Remove four hinge attaching screws. nine screws. down, removing door liner from door panel.

  • Page 38: Inner And Outer Door Panels And Door Pull

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 39: Door Seal

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 40: Front Panel And Panel Seal

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 41 SCREW HOLD-DOWN CLIP DOOR SWITCH FRONT PANEL LOCATOR SEAL STICKER DOOR CATCH NAMEPLATE HINGE HOLE PLUGS DOOR FRONT PANEL CATCH SCREW SCREW LOCATOR STICKER LOWER ACCESS PANEL SCREW D288PE3A Figure 33 505038...

  • Page 42: Door Hinge

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 43: Burner System Components (Gas Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 44 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 45: Burner Housing And Heat Shroud (Gas Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 46: Thermistor Or Thermostat

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 47: Motor And Exhaust Assembly

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 48 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 49 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 50: Front Bulkhead Assembly

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 51 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 52: Cylinder Belt

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 53: Cylinder Assembly

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 54: Rear Seal

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 55: Cylinder Rollers

    REAR OUTLET SEAL COVER REAR BULKHEAD ATTACHING SCREWS REAR BULKHEAD ATTACHING SCREWS CYLINDER ROLLER HEATER CYLINDER ROLLER EXHAUST DUCT SCREW D298SE3B Figure 51 505038...

  • Page 56: Rear Bulkhead And Heater Box

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 57 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 58 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 59: Terminal Block Or Power Cord

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 60 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 61: Cabinet And Base

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 62 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 63: Section 6 - Adjustments

    SECTION 6 Adjustments WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 64: Burner Flame (Gas Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 65: Section 7 - Test Procedures

    SECTION 7 Test Procedures WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 66 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...
  • Page 67 WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 68: Burner System Operation (Gas Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 69: Electrical Circuit To Ignition System (Gas Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 70: Sensor Check (Gas Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 71: Thermal Fuse (Electric Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 72: Fabric Selector Switch

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 73: Accumulator (Metered Models)

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 74: Door Switch

    WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. • Never start the dryer(s) with any guards/panels removed. •...

  • Page 75: Section 8 - Internal Wiring Of Dryer Motor Switch

    SECTION 8 Internal Wiring of Dryer Motor Switch WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the dryer(s) before servicing. • Close gas shut-off valve to gas dryer(s) before servicing. •...

  • Page 76: Section 9 - Wiring Diagrams

    SECTION 9 Wiring Diagrams WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Models HSE117*A, SSE107*A, SSE117*A and SSE307*A 505038...
  • Page 77 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Models HSE117*A, SSE107*A, SSE117*A and SSE307*A 505038...
  • Page 78 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Models HSE117*A, SSE107*A, SSE117*A and SSE307*A 505038...
  • Page 79 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Models HSG119*A, SSG109*A, SSG119*A and SSG309*A 505038...
  • Page 80 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Models HSG119*A, SSG109*A, SSG119*A and SSG309*A 505038...
  • Page 81 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Models HSG119*A, SSG109*A, SSG119*A and SSG309*A 505038...
  • Page 82 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Models SSE007*A and USE007*A 505038...
  • Page 83 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Models SSE007*A and USE007*A 505038...
  • Page 84 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Models SSE007*A and USE007*A 505038...
  • Page 85 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Models SSE407*A, SSE417*A, SSE507*A and SSE517*A 505038...
  • Page 86 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Models SSE407*A, SSE417*A, SSE507*A and SSE517*A 505038...
  • Page 87 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Models SSE407*A, SSE417*A, SSE507*A and SSE517*A 505038...
  • Page 88 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Models SSE707*A and SSE717*A 505038...
  • Page 89 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Models SSE707*A and SSE717*A 505038...
  • Page 90 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Models SSE707*A and SSE717*A 505038...
  • Page 91 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Model SSG009*A and USG009*A 505038...
  • Page 92 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Model SSG009*A and USG009*A 505038...
  • Page 93 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Model SSG009*A and USG009*A 505038...
  • Page 94 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Model SSG409*A, SSG419*A, SSG509*A and SSG519*A 505038...
  • Page 95 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Model SSG409*A, SSG419*A, SSG509*A and SSG519*A 505038...
  • Page 96 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Model SSG409*A, SSG419*A, SSG509*A and SSG519*A 505038...
  • Page 97 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 SCHEMATIC Models SSG709*A and SSG719*A 505038...
  • Page 98 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – UPPER DRYER Models SSG709*A and SSG719*A 505038...
  • Page 99 WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. W030 CONNECTION DIAGRAM – LOWER DRYER Models SSG709*A and SSG719*A 505038...

This manual is also suitable for:

Sse007*aHsg119*aSse107*aSse117*aSse307*aSse407*a ... Show all

Table of Contents