What To Do If - John Lewis JLBICH605 Instruction Manual

Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the
appliance with steam blasters or high-
pressure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the
appliance operates.
Removing the dirt:
1. – Remove immediately: melting
plastic, plastic foil, and food containing
sugar. Use a special glass ceramic

What to do if...

Problem
You cannot start the appliance or
operate it.
The residual heat indicator does
not come on.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound
operates.
comes on.
2. Clean the appliance with a damp cloth and
3. At the end rub the appliance dry with
Possible cause and remedy
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
• The child safety device operates
section "Child safety device".
• Start the appliance again and set the heat setting in 10 seconds.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
You covered . Uncover the sensor field.
• The automatic switch-off operates. Stop the appliance and start
it again.
Overheating protection for the cooking zone operates. Stop the
cooking zone and start it again.
9
scraper. Put the scraper on the glass
ceramic surface at an acute angle and
slide the blade on the surface.
– Stop the appliance and let it cool
down before you clean: limescale rings,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaner for
glass ceramic or stainless steel.
some detergent.
a clean cloth.
. Stop the function. See the