Martin MAC 350 Entour User Manual page 13

5.See Figure 3. Secure the fixture
against clamp or bracket failure with a
safety wire that can bear at least 10
times the weight of the fixture using the
attachment point marked "SAFETY
WIRE" in the base of the fixture. This
attachment point is designed to fit a
carabiner clamp. Do not use carrying
handles as safety attachment points.
6.Check that the head will not collide
with other fixtures or objects. Allow a
minimum center-to-center distance of
400 mm (15.8 ins.) minimum between
Figure 3: Safety cable attachment point
MAC 350 Entour fixtures.
Physical installation 13