Evinrude E-Tec Operator's Manual page 34

4) Holding the flywheel guard out of the way,
hook the knot of your emergency start cord
into the notch on the flywheel. Wind the
cord clockwise in the flywheel ridge, mak-
ing one and a half full windings with the
cord.
1. NEUTRAL
2. Knot
3. Rope in flywheel ridge
5) Turn key switch ON.
6) From a secure position in the boat, pull
hard on emergency starting cord to start
engine.
CAUTION
Keep everyone clear of your immediate
area when pulling on emergency start-
ing cord, especially behind you.
Repeat procedure, if necessary, until engine
starts.
7) Refasten flywheel guard in place by push-
2
3
1
If equipped, snap emergency stop switch lan-
yard to secure place on clothing. Proceed im-
mediately to nearest landing for service.
ing the three fastening tabs back onto the
fittings.
1. Fastening tabs
DANGER
Contact with a rotating flywheel can
cause severe personal injury. Use
extreme care in re-fastening the fly-
wheel guard on the fastening tabs.
Keep hands, hair, and clothing away
from coming in direct contact with
rotating parts.
O
PERATION
1
31