Innova CAN OBD2 Owner's Manual page 54

Live Data Mode
RECORDING (CAPTURING) LIVE DATA
2. Use the UP
as necessary, to highlight "Live Data
Menu", then press the ENTER/LD
button.
The "Live Data Menu" displays.
3. Use the UP
as necessary, to highlight "Record Live
Data", then press the ENTER/LD
button.
The "Record Live Data Menu" dis-
plays.
4. Use the UP
as necessary, to highlight "Record by
manual
ENTER/LD
5. When the "Record by Manual Trigger" screen displays, select the
desired trigger point as follows:
The Scan Tool is capable of recording approximately 20
frames of Live Data. Record by DTC trigger lets you select the
point in time at which you wish the Scan Tool to begin
recording Live Data. You can set the trigger point to record the
20 frames of data before an event (when the DTC was set),
after the event, or in the middle (10 frames before and 10
frames after the event.
Beginning - records approximately
20 frames of Live Data after the
ENTER/LD
Middle - records approximately 10
frames of Live Data before and 10
frames after the ENTER/LD
button was pressed.
End - records approximately 20 frames of Live Data before the
ENTER/LD
6. Use the UP
desired trigger point, then press the ENTER/LD
A "One
message shows on the display.
When the Scan Tool is ready to
record Live Data, the "Record Live
Data" screen displays.
7. Put the engine in the operating condition
where the problem manifests itself.
52
and DOWN
and DOWN
and DOWN
trigger", then
button.
button was pressed.
button was pressed.
and DOWN
moment please.
buttons,
buttons,
buttons,
press the
buttons, as necessary, to select the
. ."
button.
OBD2