Recording (Capturing) Live Data - Innova CAN OBD2 Owner's Manual

The "Custom Live Data" menu displays, with the first PID in the
menu highlighted.
4. Use the UP
to scroll through the available PIDs.
When the PID you wish to display is
highlighted, press the ENTER/LD
button to select it (a "checkmark" will
show in the checkbox to the right of the
PID to confirm your selection). Repeat
the procedure until only the PIDs you
want to display have all been selected.
To deselect a currently selected PID, highlight the PID, then
press the ENTER/LD
removed from the checkbox.
5. When you are finished making your selection(s), scroll to the end of
the PID list and highlight the word DONE, then press the ENTER/LD
button.
The Scan Tool is now in "Custom Live Data" mode. Only the
PIDs you selected are shown on the Scan Tools display.
To toggle between the "Custom Live Data" display and the full
Live Data display, momentarily press the ENTER/LD
6. To exit the "Custom Live Data" mode, press and hold the
ENTER/LD

RECORDING (CAPTURING) LIVE DATA

You can record and save several frames of Live Data information for
each PID supported by the vehicle in the Scan Tool's memory.
Recorded Live Data can serve as valuable information to help you in the
troubleshooting of vehicle problems.
There are two ways that the Scan Tool can "record" Live Data:
Record by DTC Trigger
Record by Manual Trigger
If the POWER/LINK
Live Data mode, any stored (recorded) Live Data will be
cleared (erased) from the Scan Tool's memory.
Record by DTC Trigger
This function automatically records (captures) Live Data information
when a DTC sets and saves it in the Scan Tool's memory. The recorded
(captured) data can be a valuable troubleshooting aid, particularly if you
are experiencing a fault that is causing a DTC to set.
OBD2
RECORDING (CAPTURING) LIVE DATA
and DOWN buttons
button. The checkmark will be
button until the "Mode Selection Menu" displays.
button is pressed at any time while in
Live Data Mode
button.
49