Innova CAN OBD2 Owner's Manual page 40

Using the Scan Tool
VIEWING ENHANCED DTCs
The Diagnostic Trouble Code (DTC) and related code definition
are shown in the lower section of the LCD display.
The Scan Tool will display a code only
if codes are present in the vehicle's
computer memory. If no codes are
present, a "No Enhanced DTC's are
presently stored in the vehicle's
computer" is displayed. Press the
ENTER/LD
Honda/Acura Enhanced menu.
3. If more than one code was retrieved press the DTC SCROLL
button, as necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool's communication link with the vehicle's computer
disconnects. To re-establish communication, press the LINK
button again.
4. When the last retrieved DTC has been displayed and the DTC
SCROLL
Honda/Acura Enhanced menu.
To view additional enhanced DTCs, repeat steps 1 through 4, above.
To exit the enhanced mode, use the UP
buttons, as necessary, to select Exit from the Honda/Acura
Enhanced menu, then press the ENTER/LD
Scan Tool returns to the OBD2 DTC screen.
Toyota/Lexus Enhanced DTCs
When View Enhanced DTCs is selected
from the Enhanced Main Menu (and
Toyota/Lexus is selected, if prompted), the
Toyota/Lexus Enhanced menu displays.
Depending on the protocol used to commu-
nicate with your vehicle, the Toyota/Lexus
Enhanced menu provides options to view:
Current DTCs, History DTCs or Pending
DTCs
38
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the and buttons, as necessary, to view the
additional information.
button to return to the
button is pressed, the Scan Tool returns to the
and DOWN
button. The
OBD2