2-Thread Rolled Hem - Bernina Serger User Manual

Medium weight fabric, 4" x 6"
Fabric:
80/12 Universal
Needle:
2 cones of serger thread (red, green)
Thread:
Standard
Presser Foot:

2-thread Rolled Hem

Stitch:
Upper Looper Converter
Accessory:
Using the small screwdriver and brush/needle insertion tool,
remove the left needle. Snug the needle set screw after
removing the needle.
Attach the Upper Looper Converter to the upper looper.
Note: This is an optional accessory for the 700D.
Thread the serger for a 2-thread
colors to match the color-coded threading path on the serger.
Adjust all thread tension settings as indicated below.
Pull the Stitch Selection lever toward you.
Place the fabric under the presser foot and serge along one 6"
edge, trimming about ⅛" from the raw edge.
Return stitch length and thread tension levers to normal.
Return the Stitch Selection lever to normal serging position.
2-Thread Rolled Hem
using thread
Suggested Settings
Upper Looper .................. Converter
Lower Looper ····························· 3-5
Left Needle································· N/A
Right Needle ······························ 3-5
Stitch Length ........................... 1-1.8
Cutting Width .......................... 1-1.5
Differential Feed ························ N
21