GTX DI Models
The front storage area includes a latch
to hold an approved fire extinguisher
(sold separately).
F18L0LY
1. Retaining straps
2. Extinguisher (sold separately)
WARNING
Ensure to properly secure extin-
guisher with the supplied retaining
straps.
17) Front Storage
Compartment Cover
Latch
Pull the latch lever upward in order to
open the front storage compartment
cover. Always relatch.
NOTE: Verify periodically the lock pin
tightness of storage cover. Tighten if
needed and make sure storage cover
latches properly.
18) Tool Kit
Contains tools needed to perform basic
watercraft maintenance.
19) Air Intake Opening
This is where air enters to supply the
engine and to ventilate the engine
compartment. If the air intake opening
is kept under water, water will get in-
side bilge.
1
2
CAUTION: If the air intake opening
is kept under water, such as turning
constantly in tight circles, water will
get inside bilge, which may cause
severe damage to internal parts of
the engine.
20) Seat Strap
The seat strap provides a handhold to
assist boarding and is used as a hand-
hold for the passenger.
21) Seat Latch
Removing the seat allows access to
the engine compartment.
The seat latch is located at the rear end
and underneath the seat.
2-Up Seat Models
F01L8XZ
TYPICAL
1. Seat latch
3-Up Seat Models
1
F17L0EY
1. Seat latch
1
43