Throttle System; Shifter System; Vts (Variable Trim System) (If So Equipped); Storage Compartment Covers And Seat - Sea-doo GTI 2003 Operator's Manual

Throttle System

Check throttle lever for free and smooth
operation. It should return to its initial
position immediately after it is released.
WARNING
Check throttle lever operation be-
fore starting the engine.
All Models except RFI and DI
CAUTION: Engine can be flooded if
throttle lever is applied several times
when engine is not running. If en-
gine is flooded, it will not start.
All Models

Shifter System

Check reverse gate operation for free
movement. With shift lever in forward
position, the gate should be in upward
position and offering a resistance to go
downward. With the shift lever in neutral
position, gate should be in middle posi-
tion. With shift lever in reverse position,
gate should be in downward position.
WARNING
Verify the reverse gate operation
before starting the engine.
VTS (Variable Trim System)
(if so equipped)
Push on arrows on VTS button to check
nozzle movement.
Storage Compartment
Covers and Seat
Ensure they are closed and latched.
WARNING
Make sure seat is securely latched.
Safety Lanyard and Engine
Start/Stop Button
Position shift lever in neutral. Ensure that
both switches operate properly. Start en-
gine and stop it using each switch indi-
vidually.
WARNING
Should the safety lanyard cap is
loose or fail to remain on its post,
replace it immediately in order to
avoid unsafe use.
WARNING
If engine does not shut-off when
pushing engine start/stop button
or by disconnecting the safety lan-
yard, stop the engine by applying
the choke and turning fuel tank
valve (if so equipped) to OFF posi-
tion. Do not operate the watercraft
further, see an authorized SEA-DOO
dealer.
55