Table of Contents
Advertisement
Introducing the
Heat-N-Glo
Gas Appliances
Pre-installation
Preparation
Heat-N-Glo direct vent gas appliances are designed
to operate with all combustion air siphoned from
outside of the building and all exhaust gases expelled
to the outside.
The information contained in this Installers Guide ,
unless noted otherwise, applies to all models and gas
control systems.
Gas appliance diagrams, including the dimensions,
are shown in this section.
This gas insert and its components are tested and
safe when installed in accordance with this Installers
Guide . Report to your dealer any parts damaged in
shipment, particularly the condition of the glass.
Do not install any unit with damaged, incomplete,
or substitute parts.
The vent system components and trim surrounds are
shipped in separate packages. The gas logs are
packaged separately and must be field installed.
Read all of the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum safety
and benefit. Failure to follow these instructions
will void the owner's warranty and may present a
fire hazard.
The Heat-N-Glo Warranty will be voided by, and Heat-
N-Glo disclaims any responsibility for, the following
actions:
• Installation of any damaged fireplace or vent sys-
tem component.
• Modification of the fireplace or direct vent system.
• Installation other than as instructed by Heat-N-Glo.
• Improper positioning of the gas logs or the glass
door.
• Installation and/or use of any component part not
manufactured and approved by Heat-N-Glo, not
withstanding any independent testing laboratory or
other party approval of such component part or
accessory.
ANY SUCH ACTION MAY POSSIBLY CAUSE A
FIRE HAZARD.
2
Getting
Started
2
Hide quick links:
Advertisement
Table of Contents
