Heat-N-Glo BAY-INS Installer's Manual page 11

Exhaust Vent Pipe
Figure 3.
V= 14 ft. Minimum
50 ft. Maximum
Warning: Do not block
pipe end with insulation
or any other sealing
material.
WARNING
THE EXHAUST PIPE MUST ONLY BE
CONNECTED TO THE EXHAUST
STARTING COLLAR OF THE UNIT
AND THE CENTER COLLAR OF THE
TERMINATION CAP.
THE INLET AIR PIPE MUST ONLY BE
CONNECTED TO THE INLET AIR
COLLAR OF THE UNIT AND EITHER
ATTACHED TO THE INLET AIR
COLLAR OF THE TERMINATION CAP
OR TERMINATED IN THE CHIMNEY.
This option shows
both exhaust and inlet
air vent pipes
attached to the
adaptor.
8