After An Alarm - C&K systems System 236i User Manual

AFTER AN ALARM OCCURS:
Enter your PIN and push the
PIN
REQUIRED
# key.
.
This will silence the bell/siren and disarm the system.
.
The red ZONE lights on the keypad will flash fast to help you remember where the
violations occurred.
If this is a false alarm and no emergency response is needed, call
our central station IMMEDIATELY at
cancel the alarm.
.
Write down the number of the faulted zones to help us service you.
Clear the alarm memory and red ZONE lights
by pushing the
then pushing the # key.
18
key, entering the digit "1",
to
1