AFTER AN ALARM OCCURS:
Enter your PIN and push the
PIN
REQUIRED
# key.
.
This will silence the siren/bell and disarm the system.
.
The red ZONE lights on the keypad will flash to help you remember
where the violations occurred.
If this is a false alarm and no emergency response is needed, call
our central station IMMEDIATELY at
cancel the alarm.
.
Write down the number of the triggered zones to help us service you.
Clear the alarm memory and red ZONE lights
by pushing the
then pushing the # key.
key, entering the digit "1",
*
#
to
1
#
*
19