C&K systems System 236i User Manual page 15

.
To indicate that zones are bypassed, the zone LED for the bypassed zone will
flash slowly.
1
NOTE: Zones can be also be bypassed by remote programming. When remote pro-
gramming is used, the system can either be armed or disarmed.
.
The procedures for adding a bypass and removing a bypass are identical.
.
To remove a bypass:
Enter your PIN, push the
from which the bypass is to be removed, then push the # key.
Enter your PIN, push the
bypass is to be removed, then press the # key.
NOTE: Disarming your alarm system
key, enter the digit "2", enter the zone
OR
key, enter the zone from which the
REMOVES
all bypasses.
15