C&K systems System 236i User Manual page 12

HOME ARMING
Home Arming arms perimeter zones, while bypassing interior zones.
PIN
REQUIRED
.
.
.
.
.
.
OPTION
INSTALLED
12
Make sure the green READY light is on.
Enter your PIN (if required),
push the key, enter the digit "4",
then push the # key.
The keypad will beep twice to confirm that the system is armed.
The red ARM light will be on while the system is armed.
Home Arming allows you to move about freely inside the premises while the system is
armed.
The red ZONE light(s) of bypassed zones will flash slowly.
You can enter the premises without setting off an alarm through any time delay entry.
(Don't forget to disarm the system after entering!)
Exit Delay Disable (see page 16).
4