CENTRAL STATION TEST
OPTION
INSTALLED
This option tests the reporting capability of your system by sending a test
message to the central station. Weekends are the best time for the
CENTRAL STATION TEST. To schedule one, call our central station at:
To initiate the CENTRAL STATION TEST:
PIN
REQUIRED
.
.
CENTRAL STATION
Enter your PIN (if required),
push the
key, enter the digit "6",
the digit "1", then push the # key.
If the test message was successfully transmitted to
the central station, the keypad will beep twice.
If the test message was not successfully transmitted to the central station, the
keypad will beep five times, and the SERVICE light will flash fast. Call our Service
Department for assistance.
6
1
27
Need help?
Do you have a question about the System 236i and is the answer not in the manual?
Questions and answers