Communication and Monitoring
The GUI bellow tells the WIFI hasn't been set yet.
If WIFI has been set, shown as following figure.
8.2.4 GPRS communication
GPRS function is that sends fault message to user when inverter is at fault.
Hardware Requirements: SIM card, inverter equipped with GPRS, mobile telephone.
Monitor mode: message.
GPRS settings:
Step1: Use mobile telephone to set PIN code of SIM card which will be installed in inverter.
Step2: Connect cable following the steps of Ethernet before opening "SolarPower Browser".
34
Wifi
Link Name:
Press ESC to Back
Wifi
Link Name:
BAFFAL0-5D8959
Press ESC to Back
Hardware Requirements: router、inverter equipped with WIFI、PC(with
SolarPower Browser software)
:
:
2012-03-03 10 28 10
:
:
2012-03-03 10 28 50