Communication And Monitoring; Communication Interface; Communication Mode; Ethernet Communication - Samil Power SolarRiver 3400TL-D Product Manual

8 Communication and Monitoring

8.1 Communication Interface

Standard configuration:
1. Ethernet: Transmit the inverter working state such as output voltage, current, frequency, fault
information to the PC machine or other monitoring system. Ethernet can achieve multi-inverter wired
network at the same time.
Optional configuration:
WIFI: Wireless connect to route. Transmit the inverter working state such as output voltage, current,
frequency, fault information to the PC machine or other monitoring system. WIFI can achieve
multi-inverter wireless network at the same time.
RS485: Achieve multi-inverter network to monitor the inverter working state such as output voltage,
current, frequency, fault information
GPRS: Inform message by message.

8.2 Communication mode

When user want to know the information of the power system and monitor power system. We offer
following communications.

8.2.1 Ethernet communication

You can connect inverter to Internet by router (the router is not special for inverters, you can get any
brand in the market). Then you can see the inverter's data in any place of the world.
Hardware Requirements: computer which support windows(including xp,vista,win7), router, netting
twine, inverter(LAN mode).
Monitor mode: LAN and WAN.
LAN: Install SolarPower Browser in PC which can monitor inverters .In this mode, you can use a router
or nonuse.
If you use a router, you can monitor 254 inverters.
Only choose one optional configuration when inverter is working.
Figure 22 Ethernet communication
WAN
Router
Communication and Monitoring
27