Customize Screen Menu - Kathrein UFS 946/CI+ Operating Instructions Manual

Mainmenu - Settings

Customize Screen Menu

After calling up the menu you will see the
following on-screen display:
Individual items are selected using the

buttons.
Changes to the current settings can be

made using the buttons.
Sleep Timer
You can use the "Sleep Timer" function to set an inactive time period, after which the receiver will

automatically switch to "Standby" mode. To do this, use the buttons to select "On". Exit the

menu using the button. Now press the On/Off button. The receiver now displays a window in which

you can use the buttons to select the desired inactive time period for the receiver. The receiver
will then continue running in the normal way and then when the selected inactive time period expires,
automatically switch into "Standby" mode.
If you do not start to enter the inactive time period within fi ve seconds of the window appearing, the
receiver will automatically revert to "Standby" mode.
Automatic standby after 4 hours
If this function is activated "On", the receiver will switch automatically to the standby mode four hours
after the remote control was last used.
Channel Banner Duration (channel information)
Select here how long the channel information should be displayed after a change of channel. The options
available are 1, 2, 3, 4, 5 or 6 seconds.
Playback Banner Duration (playback information)
Select here how long the playback information should be displayed after the start of playback. The options
available are 1, 2, 3, 4, 5 or 6 seconds.
Display Volume Bar
Select here whether, on changing the volume using the receiver remote control, the volume bar should
be displayed on the TV screen (select: "On") or not (select: "Off").
75