Panasonic KX-TDA100 Installation Manual page 164

3.3 Installation of the KX-TDA Maintenance Console
Notes
• During long programming sessions, it is highly recommended that you periodically save the system
data to the SD Memory Card. If the Hybrid IP-PBX suffers a sudden power failure or if the system
is reset for some reason and all system data is lost, it can be restored from the SD Memory Card.
To save the system data to the SD Memory Card, either click the "SD Memory Backup" icon, or
exit KX-TDA Maintenance Console and click "Yes" to save when prompted.
• When programming Hybrid IP-PBX data which can be displayed on a proprietary telephone (PT)
(extension names, group names, System Speed Dialing names, etc.), it is possible to enter
characters which cannot be displayed on a KX-T7600 series PT.
Characters which can be displayed on a KX-T7600 series PT are shown below in the white cells.
• The PC will not perform any shutdown operation, or enter the power-saving system standby mode
while the KX-TDA Maintenance Console is connected to the Hybrid IP-PBX. To perform either of
the operations above, first close the connection to the Hybrid IP-PBX.
CAUTION
Do not remove the SD Memory Card while power is supplied to the Hybrid IP-PBX. Doing so may cause
the Hybrid IP-PBX to fail to start when you try to restart the system.
164 Installation Manual