Scanning Information - Viessmann VITODENS 200-W Installation Instructions Manual

Vitoden 200-W pages 44 -

Scanning information

Subject to connected components, you can scan current temperatures and operating
conditions.
Press the following keys:
i
1.
For boiler water temperature
3
Display indication
1
3
5
5
6
003572 h
030417
030417
000850 h
4/9/07 7:56 pm
°C -
65
Explanation
20ºC Outside temperature
65ºC Boiler water
temperature
50ºC DHW temperature
45ºC DHW temperature
for solar operation
70ºC Collector temperature
Burner hours run
Burner starts
Fuel consumption
Hours run - solar
circuit pump
Page 24
_
+
2.
for additional scans
3.
OK to end scanning
Notes
Display only if an outside
temperature sensor is connected
-
Display only if a DHW cylinder
is installed.
Display only if a solar heating
system is connected.
Display only if a solar heating
system is connected.
The hours run can be reset to 0
by pressing
displayed are only approximate
values.
The number of burner starts can
be reset to 0 by pressing
The fuel consumption can be
reset to 0 by pressing
The hours run can to reset to 0
on the Vitosolic solar control unit.
The hours run displayed are only
approximate values.
. The hours run
67