Scanning Options; Scanning Information - Viessmann VITODENS Operating Instructions Manual

Scanning options

Scanning information

Subject to connected components, you can scan current temperatures and
operating conditions.
Press the following keys:
1. c
for boiler water tempera-
ture.
Display indication
1 20 ºC Outside tempera-
3 65 ºC Boiler water tem-
5 50 ºC DHW temperature
5□ 45 ºC DHW temperature
6 70 ºC Collector tempera-
| 003572 h
||| 030417
||||
030417
|||||
000850 h
16
2. a/b for additional scans.
3. d
Description Notes
Display only if an outside tem-
ture perature sensor is connected.
–
perature
Display only if a DHW cylinder
has been installed.
Display only if a solar heating sys-
for solar operation tem is connected.
Display only if a solar heating sys-
ture tem is connected.
Burner hours run The hours run can be reset to "0"
by pressing e. The hours run
displayed are only approximate
values.
Burner starts The number of burner starts can
be reset to "0" by pressing e.
Fuel consumption The fuel consumption can be
reset to "0" by pressing e.
Hours run – solar
The hours run can be reset to "0"
circuit pump on the Vitosolic solar control unit.
The hours run displayed are only
approximate values.
to end scanning.