Scanning Information - Viessmann Vitodens 200-W Installation Instructions Manual

Scanning information

Subject to connected components, you can scan current temperatures and operating
conditions.
Press the following keys:
i
1.
For boiler water temperature
3
Display indication
1 20ºC
3 65ºC
5 50ºC
5 45ºC
6 70ºC
003572 h
030417
030417
000850 h
°C -
65
Explanation
Outside temperature
Boiler water
temperature
DHW temperature
DHW temperature
for solar operation
Collector temperature
Burner hours run
Burner starts
Fuel consumption
Hours run - solar
circuit pump
_
+
2.
for additional scans
3.
to end scanning
OK
Notes
Display only if an outside
temperature sensor is connected
-
Display only if a DHW cylinder
is installed.
Display only if a solar heating
system is connected.
Display only if a solar heating
system is connected.
The hours run can be reset to 0
by pressing
displayed are only approximate
values.
The number of burner starts can
be reset to 0 by pressing
The fuel consumption can be
reset to 0 by pressing
The hours run can to reset to 0
on the Vitosolic solar control unit.
The hours run displayed are only
approximate values.
. The hours run
67