Electrical Connections; Exhaust System Hoses/Tubes Connection - Mercury SKI Instruction Manual

Electrical Connections

1. Connect instrumentation wiring harness to engine and secure with clamp.
a -

Exhaust System Hoses/Tubes Connection

1. Exhaust hoses/tubes must be connected to exhaust elbows so that they do not restrict
the flow of discharge water from the elbow. If hoses/tubes are connected incorrectly, a
hot spot in the hose/tube can occur, and can eventually burn through.
2. Exhaust hoses/tubes should be secured at each connection with at least 2 hose clamps.
a -
b -
IMPORTANT: S-pipes must be routed under the transmission mounts.
a -
b -
Instrumentation Wiring Harness Connection
a
b
Correct
Incorrect
S-Pipe
Transmission Mount
a
a
GASOLINE ENGINES SKI MODELS
75532
22032
b
74832
Page 31 of 48
INDEX