Connection To Hot Water Supply - Miele WS 5426 MC 13 Operating And Installation

Connection to hot water
supply
To keep electricity consumption costs
down this machine can be connected
to a (ring) piped hot water supply.
The maximum temperature must not ex-
ceed 70°C.
It is not economical to run it from an in-
dividual hot water supply if it is not in
continuous use, as the water in the sup-
ply pipes cools down and more energy
would be required to reheat the water.
For operational reasons the ma-
chine must not be connected to hot
water only.
For hot water connection the same con-
ditions apply as for cold water connec-
tion.
If the machine is not installed for hot
water connection:
Both inlet hoses can be connected
to cold water using an adapter
piece, without the machine being re-
programmed.
or
unscrew inlet hose (red stripes)
plug the inlet connection with the
cap supplied.
The machine will have to be repro-
grammed by an authorised service
dealer.
Installation
49