Connection To The Hot Water Supply - Miele PW 6055 Operating And Installation Instructions

Installation and connection

Connection to the hot water supply

To keep electricity consumption costs
down this machine can be connected
to a (ring) piped hot water supply.
The maximum temperature must not
exceed 70°C.
It is not economical to run it from an
individual hot water supply if it is not in
continuous use, as the water in the
supply pipes cools down and more
energy would be required to reheat the
water.
For hot water connection the same
conditions apply as for cold water
connection.
The inlet hose with the red stripes (hot
water hose) is connected to the
stopcock.
For operational reasons the machine
must not be connected to hot water
only.
If the machine is not connected to a hot
water supply, the hot water inlet hose
must be disconnected and the water
settings for the main wash, pre-wash
and rinses must be reprogrammed.
The programme durations may be
longer.
50
Connection to a very hot water
supply
It is possible to connect the machine to
a very hot water supply, 70°C to a
maximum of 85°C. A special inlet hose
is required. The machine must also be
reprogrammed by a Miele service
technician or Miele authorised service
dealer.